Pulastic Classic 70

Pulastic Classic 70

Pulastic Classic 70 Eco is a sports floor providing appropriate comfort and safety in sports activities combined with good multifunctional characteristics.

Pulastic Classic 70 Eco is approved by the F.I.V.B. (International Volleytball Federation), F.I.B.A. (International Basketball Federation), I.H.F. (International Handball Federation) and B.W.F. (Badminton World Federation)

Pulastic Classic 70 Eco is manufactured under ISO 9001 for quality control and ISO 14001 for environmental care.

Uses:

  • Indoor
  • Training and competition of all common international ball games and Badminton
  • Physical education
  • Cultural events, exams exhibitions and, a variety of non-athletic activities.

Characteristics / Advantages :

  • Appropriate resiliency for comfort and injury prevention
  • Seamless, non-porous and smooth surface for easy maintenance, repair and resurface procedures
  • Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through outstanding mechanical strength and wear resistance
  • Water based finish for very low odour during installation and maximum indoor clean air protection during use
  • Good mechanical strength and outstanding wear resistance for minimum life cycle cost and maximum usability (return on investment)
  • Outstanding ball bounce
  • Wide colour selection with outstanding colour fastness
  • No glare for clear visibility of the durable line marking
  • Excellent contact noise reduction (acoustic isolation)
  • Outstanding thermal insulation

Product Data

Colours : 16 Classic colours and 16 Design colours as per manufacturers colour brochure.

Technical Data / System

Nominal thickness 7 mm
Shock absorption 18% EN 14808
Vertical Deformation 0,8 mm EN 14809
Linear Friction (dry) 98 EN 13036-4
Linear Friction (damp)

0,3

Leroux

Ball Bounce 98 % EN 12235
Gloss 3 % EN 2813
Resistance to rolling load > 1500 N EN 1569
Resistance to impact > 800 gr @ 10°C EN 1517
Resistance to indentation 0,35 mm @ 5 min EN 1516
0,15 mm @ 24 hrs EN 1516
Resistance to wear 150 mg EN ISO 2813
Flammability Bfl-S1 EN 13501-1

Technical Data / Components

V.O.C. content – adhesive Solvent free
Resin composition Free of solvents and heavy metals
Elongation at break – structure 200 % DIN 53455
Tensile strength – structure 10 N/mm² DIN 53455
Tear strength – structure 25 N/mm DIN 53515

Installation Conditions

Installation shall be carried out corresponding to manufacturers installation instructions, by a manufacturer trained installer.

Cleaning / Maintenance

The instructions for pre-treatment and cleaning corresponding to manufacturers document “Initial use and general maintenance tips for your Pulastic sports floor” shall be carried out to promote hygiene and assure that the floor retains its matt appearance and proper grip/sliding characteristics. This improves safety and enhances sport performance.

Value Base

All technical data stated in this System Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.